Commercial Office Flooring in Alpharetta, GA

Looking for commercial office flooring in Alpharetta, GA? ACC Facility Services polishes, coats and refinishes floors for offices, tech campuses and data centers along the GA-400 corridor. An office floor carries an unusual brief. It has to look considered, it has to go in without disrupting people who are trying to work, and in a server room it has to meet a specification nobody in the lobby will ever notice. Every project starts with a free on-site survey. Call (404) 480-0962.

Why office and data center floors get specified differently

• Polished concrete at a satin sheen that reads modern without glare on screens
• Static control systems for server rooms, network closets and lab space
• Raised access floor removal, slab preparation and reinstatement
• Low odor materials and dust extraction so adjacent floors keep working
• Evening, weekend and floor-by-floor phasing around occupied tenancies
• Old carpet tile and bonded adhesive fully removed rather than covered over

Working in an occupied building on the GA-400 corridor

Most of the office work we do in Alpharetta happens in a building somebody is still using, and that single fact shapes the specification more than the finish ever does. Odor matters, because a coating that smells will empty the floor above through the return air. Dust matters, because a grinder without proper extraction will put concrete dust into a server room two doors down. Noise matters, because the tenancy next door is on calls all day. So we work evenings and weekends, we run containment and extraction as standard rather than as an extra, and we phase floor by floor or suite by suite. The other recurring issue is what is underneath. Office slabs are usually hiding decades of carpet tile adhesive, and that has to be mechanically removed before anything is polished or coated. Covering it is how you end up with a floor that fails inside a year.

Office, campus and data center floor systems

Three specifications cover nearly all of the commercial office work we do here:

• Polished concrete: the default for open plan offices, lobbies and cafeterias. A satin sheen reads clean and modern, reflects lighting you have already paid for, and takes chair castors and foot traffic with no coating to wear through.
• Static dissipative coating: for server rooms, network closets and electronics labs. A conductive build tied into grounding holds surface resistance inside the specified range, which matting and wrist straps alone will not do reliably.
• Sealed and coated concrete: for back of house, plant rooms, loading areas and parking decks, where the requirement is cleanability and wear resistance rather than appearance.

What an office floor costs, and what actually drives it

Office floors are priced on area, the finish specified, what has to be removed first, and the hours we are allowed to work, so every Alpharetta building is surveyed and quoted individually and for free. The single most underestimated line is adhesive removal. Carpet tile that lifts easily still leaves a bonded residue that has to be mechanically ground off, and across a large floor plate that is a real proportion of the job. Static dissipative work is priced separately, because it involves grounding and verification rather than simply a different material. Out of hours working is quoted on its own line too, so you can see what the schedule is costing and decide whether a vacant weekend is worth more to you than a phased evening program.

How we work inside an occupied office building

1. Free on-site survey. Call (404) 480-0962 or request one online. We check what is under the carpet, test the slab, and confirm what the building will allow and when.
2. Phasing agreed with building management. Working hours, access, elevator use, containment and the handback time for each floor are agreed in writing before we mobilize.
3. Strip out and adhesive removal. Carpet tile, vinyl or raised access floor comes out, then bonded adhesive residue is mechanically ground off under full dust extraction.
4. Polished or coated to specification. The slab is polished to the agreed sheen, or the specified coating or static dissipative build is installed and verified.
5. Protection, testing and handback. Static readings are recorded where they apply, the floor is protected for the trades that follow, and we walk each area with facilities before it is reoccupied.

Office flooring in Alpharetta: what facilities teams ask

How much does commercial office flooring cost in Alpharetta?

It is priced on area, the finish, what has to be removed first, and the hours we can work, and every building is surveyed and quoted for free. The most commonly underestimated cost is adhesive removal. Carpet tile lifts easily but leaves a bonded residue that has to be ground off mechanically, and across a large floor plate that is a real part of the job. Out of hours work and any static dissipative scope are quoted on separate lines, so nothing is hidden inside a rate.

Can you work while the building is occupied?

Yes, and it is most of what we do here. We work evenings and weekends, phase floor by floor or suite by suite, and run containment and dust extraction as standard rather than as an add-on. We also specify low odor materials, because odor travels through return air and will reach tenants a long way from the work. Access, elevator use and handback times are agreed with building management before we mobilize.

Do you install static control floors for server rooms?

Yes. For server rooms, network closets and electronics labs we install conductive systems tied into grounding points so surface resistance stays inside the specified range. We agree the target range and the test method with you up front, take readings on completion, and hand those readings over for your records. Mats and wrist straps on an ordinary floor are not an equivalent, and we will say so if that is what is currently in place.

What happens to our old carpet tile and adhesive?

It all comes out. The carpet tile itself lifts quickly, but the adhesive underneath is the part that matters. It has to be mechanically ground off, because polishing or coating over bonded residue is the most reliable way to produce a floor that fails within a year. We extract the dust at source, run that stage out of hours where the building requires it, and take the waste off site.

Other flooring we install for Alpharetta businesses

• Polished Concrete in Alpharetta, GA
• Epoxy Flooring in Alpharetta, GA
• Hardwood Flooring in Alpharetta, GA
• All service areas across Metro Atlanta

Want the technical detail on the systems themselves? See our grind and seal and floor leveling pages. We also work on commercial floors in nearby Marietta, Norcross, and Cumming.

Get your free Alpharetta office floor survey

Call (404) 480-0962 or fill out the quote form below. We will check what is under your carpet, confirm the working hours your building allows, and give you an itemized quote.