Concrete Floor Polishing in Duluth, GA

Looking for concrete floor polishing in Duluth, GA? ACC Facility Services polishes floors across Gwinnett County, and a lot of our Duluth work is commercial fit-out: retail units, restaurants, gyms and offices where the floor has to look right on opening day and still look right two years later. We handle residential basements and living areas too. Every project starts with a free on-site quote. Call (404) 480-0962.

Why Duluth businesses and homeowners choose ACC Facility Services

• Finishes that suit a customer-facing space, not just a workshop
• Dye and sheen options to match your branding or interior scheme
• Takes shopping carts, chair legs, spills and constant foot traffic
• Cleans with a mop or auto-scrubber, no stripping and waxing
• We work to fit-out deadlines and coordinate with other trades
• Insured crews using dust-controlled grinding equipment

Polishing a Duluth retail or restaurant floor

Commercial units around Pleasant Hill Road and Gwinnett Place tend to have been fitted out more than once, so the slab underneath usually carries tile adhesive, levelling compound, old thinset or patches where walls and plumbing moved. All of that has to come off before polishing, and what is underneath is not always even across the unit. We grind a test area first so you know what colour and consistency you will actually get, which matters when a landlord or franchise has signed off on a look. We also work to a fit-out programme and sequence around the other trades so the floor is not what holds up your opening.

Concrete floor polishing finishes available in Duluth

Sheen changes how a space reads as much as the colour does. The three finishes we install most often in Duluth are:

• Matte finish: understated and low-glare, which suits gyms, studios and restaurants with a lot of overhead lighting. Also the safest-feeling underfoot when a floor gets wet.
• Satin finish: the most common choice for Duluth retail and offices. Enough shine to look finished, forgiving enough to hide day-to-day scuffing between cleans.
• High-gloss finish: bounces light around a unit and makes a showroom or lobby feel larger and brighter. Needs a slab in good condition and a regular cleaning routine to stay looking its best.

What concrete floor polishing costs in Duluth

On a Duluth fit-out the biggest cost variable is what the previous tenant left behind. Lifting tile, thinset or levelling compound adds real time, and a slab that has been patched in several places may need more work to look consistent. Square footage, sheen level and any dyes or decorative cuts do the rest. We quote after seeing the unit, itemized so you or your contractor can see prep and finish as separate lines.

Our concrete polishing process

1. Free on-site quote. Call (404) 480-0962 or request one online. On fit-outs we grind a test area so you can approve the look before we commit.
2. Surface preparation. We lift tile, thinset, adhesive and levelling compound, then repair cracks and patched areas.
3. Grinding. Coarse diamond tooling flattens the slab and evens out the exposure across the unit.
4. Honing and densifying. Finer diamonds refine the surface while a densifier hardens the concrete against traffic and spills.
5. Polishing. We bring the floor to your chosen sheen, seal it, and hand over with cleaning guidance for your staff or contractor.

Duluth concrete floor polishing: common questions

Can you polish the slab under our old tile?

Usually yes, and it is one of the most common requests we get from Duluth fit-outs. Tile, thinset and levelling compound all have to come off first, and how the slab looks underneath is not fully known until we grind. That is why we open a test area before quoting the full unit. Occasionally a slab turns out too patched to give a consistent polished finish, and in that case we will tell you and suggest an overlay instead.

Will it fit our fit-out schedule?

Usually without difficulty. Polishing has no long cure wait, so unlike a coating it does not lock other trades out of the space for days. Most Duluth units are done in two to four days depending on size and how much removal the slab needs. We prefer to come in after the messy overhead work is finished but before final fixtures, and we will coordinate that sequence with your contractor at the quote.

How do we clean and maintain it?

Simply, which is a large part of the appeal for restaurants and retail. Sweep or dust mop daily and clean with a neutral pH cleaner and a mop or auto-scrubber. There is no stripping and waxing cycle like a vinyl floor, and no recoating like an epoxy. Avoid acidic cleaners, which can dull the surface over time. We hand over with written guidance so your cleaning crew knows what to use.

Is polished concrete slippery when wet?

A polished floor is no more slippery than most hard flooring when dry, and gloss level does affect how it behaves wet. For restaurants, entrances and anywhere that regularly gets wet we recommend a lower sheen or a slip-resistant treatment in those zones. Tell us where the wet areas will be at the quote and we will specify accordingly rather than running one finish across the whole unit.

More ACC Facility Services flooring in Duluth

• Hardwood Flooring in Duluth, GA
• Epoxy Flooring in Duluth, GA
• Garage Flooring in Duluth, GA
• All service areas across Metro Atlanta

Want the technical detail on the service itself? See our main polished concrete Atlanta and concrete polishing pages. We also polish concrete floors in nearby Norcross, Suwanee, and Buford.

Get your free Duluth quote

Call (404) 480-0962 or fill out the quote form below. We will visit your Duluth unit or home, grind a test area where it helps, and send an itemized quote at no cost.